CAP-215
23
Instruction Manual Oil-Less Compressors
8. INSTALLATION OPERATION
8.1. INSTALLATION OF THE COMPRESSOR
Remove all plastic protective plugs and caps before Installing compressor.
The oil-less compressor should be installed so that there is no vibration, e.g. from the drive motor.
- If possible install compressor in such a manner that the compressor fan can get fresh air from outside, for
instance through an opening in the wall.
- Ensure that an adequate exhaust air opening is provided (see Fig. 16).
- When locating the compressor in rooms of less than 39.2 cu. yd. space where natural ventilation is not
ensured, measures must be taken to provide artificial ventilation (this also applies when other systems having
high radiation are operating in the same room (see Fig. 17).
Artificial ventilation is effected by installation of a fan in the exhaust air opening.