DISARMING

To disarm the P205, simply switch on the vehicle's engine. The small transponder tag attached to your key chain will come in close proximity to the receiver antenna located below

the ignition switch. The P205 will decode the signal from the tag and disarm. The red status LED will extinguish and the engine can be started. If the engine is not started within 39 seconds the P205 will automatically re-arm.

ARMING

The P205 will automatically arm within 39 seconds of the ignition being switched off.

ENGINE IMMOBILISATION

When the system is armed the engine is immobilised. The two independent, normally open circuits of immobilisation ensures the engine is starved of either fuel or spark. Immobilisation points vary from vehicle to vehicle; common engine kill places include fuel injection, fuel pump, fuel cut-off solenoids, main ignition feed, low-tension distributor supplies and starter motor solenoids etc.