DGS-3024 Gigabit Ethernet Switch Manual
132
Parameter Description
Sequence A counter incremented whenever an entry to the Switch's history log is made. The
table displays the last entry (highest sequence number) first.
Time Displays the time in days, hours, and minutes since the Switch was last restarted.
Log Text Displays text describing the event that triggered the history log entry.
IGMP Snooping Group
IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP
packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Table, click IGMP Snooping Group in the Monitoring menu:
Figure 10- 16. IGMP Snooping Table window
The user may search the IGMP Snooping Table by VLAN ID (VID) by entering the VID in the top left hand corner and
clicking Search.
The following field can be viewed:
Parameter Description
VLAN ID The VLAN ID (VID) of the multicast group.
Multicast Group The IP address of the multicast group.
MAC Address The MAC address of the multicast group.
Queries A read-only field showing the status of the Querier State. Disabled implies that the
Switch is not transmitting IGMP Snooping Query packets, while Enabled means those
packets are being transmitted.
Reports The total number of reports received for this group.
Ports These are the ports where the IGMP packets were snooped are displayed.
NOTE: To configure IGMP snooping for the DGS-3204, go to the
Configuration folder and select IGMP Snooping. Configuration and other
information concerning IGMP snooping may be found in this manual under
IGMP.