D-Link DWS-1008 CLI Manual 23
set system contact
Stores a contact name for the DWS-1008 switch.
Syntax: set system contact string
string
Defaults: None.
Access: Enabled.
To view the system contact string, type the show system command.
Examples: The following command sets the system contact information to
tamara@example.com:
DWS-1008# set system contact tamara@example.com
success: change accepted.
See Also:
• clear system
• set system location
• set system name
• show system
Alphanumeric string up to 256 characters long, with no blank spaces.
set system country code
Defines the country-specific IEEE 802.11 regulations to enforce on the DWS-1008 switch.
Syntax: set system countrycode code
code Two-letter code for the country of operation for the DWS switch. You can
specify one of the codes listed in the table below