I 2 of 5 Length Control

This feature specifies whether variable-length or fixed-length decoding will be set for I 2 of 5.

To set this feature:

1.Scan the SWITCH bar code.

2.Scan your selection from the bar codes below. You’ll need to cover any unused bar codes on this and the facing page to ensure that the scanner reads only the bar code you intend to scan.

3.Complete the programming sequence by scanning the SWITCH bar code.

 

If variable-length control was selected, you must now set the features I 2

 

of 5 Maximum Label Length and I 2 of 5 Minimum Label

 

Length. If fixed-length control was selected, you must now set I 2 of 5

NOTE

Fixed Length 1 and I 2 of 5 Fixed Length 2.

 

I 2 OF 5 LENGTH CONTROL = VARIABLE-LENGTH

I 2 OF 5 LENGTH CONTROL = FIXED-LENGTH

Product Reference Guide

6-219