Setting Up for Local Printing 33
Using Windows NT With a Parallel Cable NOTE: You need administrative access to install printer drivers on your computer.
1Insert the Drivers and Utilities CD.
2When the Drivers and UtilitiesCD screen appears, click Personal Installation - Install
the printer for use on this computer only to install the additional software for your
printer.
3Select your printer from the drop-down box.
4Select Typical Installation (recommended), and then click Install.
When all of the files are installed on your computer, the Congratulations screen
appears.
5Click Finish to exit the D rivers and Utilities CD screen.
Using Windows Me With a USB or Parallel Cable NOTE: Depending on the software and printers already installed on your computer, your screens
may vary from those in the instructions.
If you are connecting the printer using a USB cable, you must install both a USB port driver
and a custom print driver.
When you attached the cable and turned on the printer and computer, the Add New
Hardware Wizard screen appeared on your computer screen.
1Insert the Drivers and Utilities CD.
If you are using a USB cable, the Wizard automatically searches for the USB driver on
the CD and installs it.
If you are using a parallel cable, skip to step3.
2After the USB port driver is found, click Finish.
3Select Automatic search for the best driver (recommended), and then click Next.
The wizard searches for a printer driver.
4Select D:\Drivers\Print\Win_9xme\<your language folder>\
dkaag2da.inf from the list on the screen (where D is the drive letter of your CD),
and then click OK.
5Click Next to install the printer driver.
6Click Next to complete installation.