Dell Printer Configuration Web Tool 181

E-Mail Alert Setup Page

Purpose:

To verify the current settings of SMTP/POP (Simple Mail Transfer

Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts

feature. In this page, you can only verify the settings of items. If you want to

change the settings, go to the pages in the Print Server Settings tab.

Values:
IPsec Settings Protocol Displays the protocol status.
IKE Displays IKE authentication.
802.1x*1 Enable IEEE
802.1x
Displays the status of IEEE 802.1x.
Authentication
Method
Displays the setting of authentication method for
IEEE 802.1x.
IP Filter
(IPv4)*8
Access List Displays the list of IP addresses that are permitted
or denied access to the printer.
*1 This item is available only when the printer is connected using LAN cable.
*2 This item is available only when the printer is connected using the wireless network
*3 This item is displayed when IPv4 Mode is selected.
*4 This item is displayed when IPv6 Mode is selected.
*5 This item is displayed only when Use Manual Address is set to Enable.
*6 This item is displayed only when an IP address has been assigned.
*7 This item is available only when using IPv6 dual mode.
*8 This item is available only for LPD or Port9100.