Connecting Your Printer 97
Turning on the Printer
CAUTION: Do not use extension cords or power strips.
CAUTION: The printer should not be connected to a UPS system.
1
Connect the power cable to the power connector on the rear of the printer,
and then to a power source.
2
Turn on the printer. When the printer is connected via a USB (Uninterruptible
Power Supply) cable, the USB driver is automatically installed.
Setting Initial Settings on the Operator Panel
You need to set the printer language, country, clock date, and time when you
turn on printer for the first time.
When you turn the printer on, the wizard screen to perform the initial setup
appears on the operator panel. Follow the steps below to set the initial settings.
NOTE: If you do not start configuring the initial settings, Ready to Print appears
on the operator panel in three minutes. After that, you can set the following initial
setup by enabling Power on Wizard on the operator panel or Dell Printer
Configuration Web Tool if needed.