446 Understanding the Tool Box Menus
TCP/IP Settings
Purpose:

To configure TCP/IP settings.

Valu es:
Apply New Settings After you change the settings, click this
button to apply the changes.
Restart printer to apply new settings Click this button to restart the printer and
apply the changes.
*1 This item is available only when the optional 250-sheet feeder is installed.
IP Address
Mode
AutoIP*Automatically sets the IP address.
A random value in the range of 169.254.1.0 to
169.254.254.255 that is not currently in use on the
network is set as the IP address. The subnet mask is set
as 255.255.0.0.
BOOTP Sets the IP address using BOOTP.
RARP Sets the IP address using RARP.
DHCP Sets the IP address using DHCP.
Panel Manually sets the IP address.
IP Address Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format
nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127
and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
Subnet Mask Manually sets the subnet mask.
It is specified using the format nnn.nnn.nnn.nnn. Each
octet that makes up nnn.nnn.nnn.nnn is a value in the
range of 0 to 255. 255.255.255.255 cannot be specified
as the subnet mask.