Dell 36XX, 34XX, 38XX, 32XX manual Suspend Remote Replication, Target

Parameters

Parameter	Description
target	Name of the target virtual disk for which to stop a
	virtual disk copy operation. You must put brackets
	([ ]) around the target virtual disk name. If the target
	virtual disk name has special characters, you must
	also put quotation marks (" ") around the target
	virtual disk name.
source	Name of the source virtual disk for which to stop a
	virtual disk copy operation. You must put brackets
	([ ]) around the source virtual disk name. If the
	source virtual disk name has special characters,
	you must also put quotation marks (" ") around the
	source virtual disk name.

Suspend Remote Replication

Description

This command suspends a Remote Replication operation.

NOTE: This command is valid only with Fibre Channel storage arrays.

Syntax

suspend remoteReplication (primary [primaryVirtualDiskName] primaries [primaryVirtualDiskName1 ...

primaryVirtualDiskNameN]) writeConsistency=(TRUE FALSE)

Parameters

Parameter	Description
primary or primaries	The name of the virtual disk for which you want to
	suspend operation. Enclose the virtual disk name in
	square brackets ([ ]). If the virtual disk name has
	special characters, also enclose the virtual disk
	name in double quotation marks (“ ”).
writeConsistency	This parameter defines whether the virtual disks
	identified in this command are in a
	writeconsistency group or are separate. For the
	virtual disks in the same write-consistency group,
	set this parameter to TRUE. For the virtual disks that
	are separate, set this parameter to FALSE.

407