Dell 4600C Removing a PC Card Module , Installing a PC Card Module


Removing a PC Card Module
1. Remove the interposer board from the CD/DVD drive.
2. Remove the power cable from the PC Card module's power connector.
3. Remove the PC Card module by pressing the green tabs on either side of the drive and lifting the module up.
4. Remove the PC Card module's flat data cable.


Installing a PC Card Module
1. Attach the PC Card module's flat data cable to the module's data connector.
2. If you are installing a new PC Card module instead of replacing one, remove the interposer board from the CD/DVD drive.
3. Gently slide the PC Card module into the computer until the green tabs securely click into position.
4. Attach the power cable to the PC Card module's power connector.
5. Attach the interposer board to the CD/DVD drive.
6. If you are installing a new PC Card module instead of replacing one:
a. Attach the flat data cable and the power cable to the card that came with the PC Card module.
b. Install the card into an empty card slot.
7. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
8. Close the computer cover.
9. Attach the computer stand (optional).

10. Connect your computer and devices to electrical outlets, and turn them on.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.