Installing a CD/DVD Drive
1. Unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured for your computer. If you are installing an IDE drive, configure
the drive for the cable select setting.
2. Gently slide the drive into place until the tabs securely click into position.
3. Connect the interposer board to the drive:
a. Ensure that the interposer board tab fits securely under the notch on the inside of the cover.
b. Attach the power cable to the interposer board.
4. If you are installing a drive that has its own controller card, install the controller card in an expansion slot.
5. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
6. Close the computer cover.
7. Attach the computer stand (optional).
8. Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.