Menu item Description
Recycled
Paper
Card Stock
Transparency
Labels
Envelope
Specifies a paper type when the Recycled setting is selected in other menus
Notes:
•Paper is the factory default setting.
•The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
•Single-sided paper labels designed for laser printers are supported for
occasional use: no more than 20 pages a month. Vinyl, pharmacy, and
dual-web labels are not supported.
Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal

Paper Size is a user-defined paper size setting. It is listed with the other paper size settings and includes similar options,

such as support for duplex printing and printing multiple pages on one sheet.

Menu item Description
Units of Measure
Inches
Millimeters
Identifies the units of measure
Notes:
•Inches is the US factory default setting.
•Millimeters is the international factory default setting.
Portrait Width
3–14 inches
76–360 mm
Sets the portrait width
Notes:
•If the width exceeds the maximum, the printer uses the maximum
width allowed.
•8.5 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.
•216 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Portrait Height
3–14 inches
76–360 mm
Sets the portrait height
Notes:
•If the height exceeds the maximum, the printer uses the maximum
height allowed.
•14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
•356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Feed Direction
Short Edge
Long Edge
Specifies the feed direction if the paper can be loaded in either direction
Notes:
•Short Edge is the factory default setting.
•Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Understanding printer menus
103