Denon AVR-1603 manual 12

ENGLISH

Setting the Digital In Assignment

Input the type of components connected to the digital input terminals.

1	Use the	(left) and	(right) buttons to assign the input function connected
	to the COAXIAL input (COAXIAL) terminal.
		(Initial)
		CD	AUX	DVD	TV	VCR	CDR	OFF
	10 COAX	CD
				(left) button		(right) button
	• Select “OFF” if nothing is connected.
	Press the ENTER or		(down) button to switch the optical input 1 (OPT 1)
	setting.
2	Use the	(left) and	(right) buttons to assign the input function connected
	to the OPTICAL input 1 (OPT 1) terminal.
				(Initial)
		CD	AUX	DVD	TV	VCR	CDR	OFF
	11 OPT1	DVD
				(left) button		(right) button
	• Select “OFF” if nothing is connected.
	Press the ENTER or		(down) button to switch the OPTICAL input 2 (OPT 2)
	setting.
3	Use the	(left) and	(right) buttons to assign the input function connected
	to the OPTICAL input 2 (OPT 2) terminal.
					(Initial)
		CD	AUX	DVD	TV	VCR	CDR	OFF
	12 OPT2	TV
				(left) button		(right) button

•Select “OFF” if nothing is connected.

Press the ENTER or (down) button to switch the auto surround mode setting.

NOTE:

•TUNER and V. AUX cannot be selected.

Setting the Auto Surround Mode

For the three kinds of input signals as shown below, the surround mode played the last is stored in the memory. At next time it the same signal inputs, the memorized surround mode is automatically selected and the signal is played.

Note that the surround mode setting is also stored separately for the different input function.

	SIGNAL	Default Auto Surround Mode
q	Analog and PCM 2-channel signals	STEREO
w	2-channel signals of Dolby Digital, DTS or other multichannel format	Dolby PLII Cinema
e	Multichannel signals of Dolby Digital, DTS or other multichannel format	Dolby or DTS Surround

1	Use the	(left) and	(right) buttons to select the Auto Surround mode.
				(Initial)
			OFF	ON
	13 AUTOSURR. ON
			(left) button	(right) button
	Press the ENTER or		(down) button to switch the Ext. In SW Level setting.
	Setting the Ext. In SW Level
Set the method of playback of the analog input signal connected to the Ext. In terminal.
1	Use the	(left) and	(right) buttons to select the Ext. In Subwoofer channel
	Level playback.
						(Initial)
			+00	+05	+10	+15
	14 EXT.IN SW +15
			(left) button		(right) button
	Press the ENTER or		(down) button if you want to start the settings over
	from the beginning.

After setting up the system

1 Press the SYSTEM SETUP button to finish system set up.

This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components or speakers are connected to or the speaker layout is changed.

12