ENGLISH
Audio Adjust
Audyssey Settings | Default settings are underlined. |
Set MultEQ®, Dynamic EQ® and Dynamic Volume®. These can be selected after Audyssey® Auto Setup has been performed. For additional information on Audyssey technology, please see page 69.
NOTE
If you have not performed Auto Setup, or if you change the speaker settings after performing Auto Setup, you may not be able to select Dynamic EQ/Dynamic Volume, and “Run Audyssey” may be displayed.
In this case, either perform Audyssey Auto Setup over again or perform “Restore” (vpage 10) to return to the settings after Audyssey Auto Setup was run.
Setting items | Setting details | |||
|
|
|
| |
MultEQ | Audyssey : Optimize the frequency response of all speakers. | |||
Select one equalizer from | Audyssey Byp.L/R : Optimize frequency response of speakers except | |||
three modes. MultEQ | front L and R speakers. | |||
corrects both time and | Audyssey Flat : Optimize frequency response of all speakers to flat | |||
frequency response | response. | |||
problems in the listening | Manual : Apply frequency response set with “Manual EQ” (vpage 47). | |||
area based on Audyssey | OFF : Turn “MultEQ” equalizer off. | |||
Auto Setup calibration. We |
|
|
| |
recommend “Audyssey”. | • “Audyssey”, “Audyssey Byp. L/R” and | |||
MultEQ is the prerequisite | ||||
“Audyssey Flat” can be selected after Audyssey | ||||
function for Dynamic EQ | ||||
Auto Setup has been performed. “Audyssey” is | ||||
and Dynamic Volume. | ||||
automatically selected after performing Audyssey | ||||
| ||||
| Auto Setup. When “Audyssey”, “Audyssey Byp. | |||
| L/R” or “Audyssey Flat” is selected, |
|
| |
| illuminates. |
|
| |
|
|
| ||
• After running Audyssey Auto Setup, if the Speaker Configuration, Distance, Channel Level, and Crossover Frequency have changed without increasing the number of speakers
measured, only 
illuminates.
•Pressing MULTEQ on the remote control unit or the main unit makes this setting.
NOTE
•“MultEQ” and “Manual” cannot be selected when “EQ Customize” is set to “Not Used” (vpage 52).
•When using headphones, “MultEQ” is automatically set to “OFF”.
Setting items |
| Setting details | |
Dynamic EQ® | ON : Use Dynamic EQ. | ||
Solve the problem of | OFF : Do not use Dynamic EQ. | ||
deteriorating sound quality |
|
| |
as volume is decreased by | • | is displayed when set to “ON”. | |
taking into account human | |||
|
| ||
perception and room | • Buttons on the remote control unit or main unit | ||
acoustics. | |||
| can be used for operations. | ||
|
| ||
|
| GOperations with the remote control unitH | |
|
| Press DYN EQ/VOL. | |
|
| Each time DYN EQ/VOL is pressed, the setting is changed as shown | |
|
| below. | |
|
|
| Dynamic EQ : ON / |
| Dynamic EQ : ON / | ||||||||||||||
|
|
| Dynamic Volume : Midnight | Dynamic Volume : Evening |
|
|
|
|
|
| |||||||||
|
| Dynamic EQ : OFF / |
| Dynamic EQ : ON / |
|
| Dynamic EQ : ON / |
| |||||||||||
|
| Dynamic Volume : OFF |
| Dynamic Volume : OFF |
|
| Dynamic Volume : Day |
|
|
| |||||||||
| GOperations with the main unitH |
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Press DYNAMIC EQ. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Each time DYNAMIC EQ is pressed, |
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
| the setting is changed as shown |
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| below. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Dynamic EQ : ON |
|
| Dynamic EQ : OFF |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
Reference Level Offset | 0dB (Film Ref) : This is the default setting and should be used when | ||||||||||||||||||
Audyssey Dynamic EQ is | listening to movies. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
referenced to the standard | 5dB : Select this setting for content that has a very wide dynamic range, | ||||||||||||||||||
film mix level. It makes | such as classical music. |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
adjustments to maintain | 10dB : Select this setting for jazz or other music that has a wider dynamic | ||||||||||||||||||
the reference response | range. This setting should also be selected for TV content as that is usually | ||||||||||||||||||
and surround envelopment | mixed at 10 dB below film reference. |
|
|
|
|
|
|
|
|
|
|
|
| ||||||
when the volume is turned | 15dB : Select this setting for pop/rock music or other program material | ||||||||||||||||||
down from 0 dB. However, | that is mixed at very high listening levels and has a compressed dynamic | ||||||||||||||||||
film reference level is not | range. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
always used in music or |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
other | Setting is enabled when “Dynamic EQ” is “ON” (vpage 46). |
| |
Dynamic EQ Reference |
|
Level Offset provides three |
|
offsets from the film level |
|
reference (5 dB, 10 dB, and |
|
15 dB) that can be selected |
|
when the mix level of the |
|
content is not within the |
|
standard. |
|
46 | Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | |
buttons | (Up/Down/Left/Right) | ||||
|
|
|