ENGLISH

Basic Operation

SURROUND MODE TONE CONTROL

SURROUND

MODE

CH SELECT /

SURROUND

PARAMETER

ENTER

CURSOR

 

SURROUND PARAMETER

SELECT

TONE DEFEAT

Basic Operation

When turned counterclockwise:

DIRECT STEREO DOLBY PRO LOGIC IIx

MONO MOVIE 5CH/7CH STEREO DTS NEO:6

ROCK ARENA JAZZ CLUB VIDEO GAME

VIRTUAL SURROUND MATRIX

To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button, then operate the selector.

DSP surround simulation

2To operate the surround mode and the surround parameters from the remote control unit

1 Select the surround mode for the input channel.

(Remote control unit)

The surround mode switches in the following order each time the DSP SIMULATION button is pressed:

MONO MOVIE ROCK ARENA

MATRIX VIDEO GAME JAZZ CLUB

2 Press the SURROUND PARAMETER button to enter the surround parameter setting mode.

The surround parameter switches in the following order each time the SURROUND PARAMETER button is pressed for the different surround modes.

3 Press the SURROUND PARAMETER button, and press the CURSOR D or H button to select the various parameters.

4 Press the CURSOR F or G button to adjust the parameter settings.

5 Press the ENTER button to finish the surround parameter mode.

•When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.

2Operating the surround mode and the surround parameters from the main unit‘s panel

1 Turn the SELECT knob to select the surround mode.

When turned clockwise:

DIRECT STEREO DOLBY PRO LOGIC IIx

MONO MOVIE 5CH/7CH STEREO DTS NEO:6

ROCK ARENA JAZZ CLUB VIDEO GAME

VIRTUAL SURROUND MATRIX

2 Press and hold in the SURROUND PARAMETER button to select the parameter you want to set.

The parameters which can be set differ for the different surround modes are displayed. (Refer to “Surround modes

and parameters” ( page 57).)

3 Display the parameter you want to adjust, then turn the SELECT knob to set it.

•When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.

2Surround parameters r

ROOM SIZE:

This sets the size of the sound field.

There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound field, “large” a large sound field.

EFFECT LEVEL:

This sets the strength of the surround effect.

The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.

DELAY TIME:

The delay time can be set within the range of 0 to 110 ms only in the matrix mode.

TONE CONTROL:

This can be set individually for each surround mode except

DIRECT.

27

ENGLISH