| SYSTEM SETUP | |
|
| |
Setting items | Setting details | |
|
| |
Crossover Freq. | 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / | |
Set the maximum frequency | 250Hz : Set the crossover frequency. | |
of the bass signal output | Advanced : Specify crossover frequency for each speaker. | |
from each channel to | ||
• Front / Center / Surround / Surr.Back / Front Height : Select the | ||
the subwoofer. Set the | ||
speaker. | ||
Crossover Frequency to | ||
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / | ||
suit the bass reproduction | ||
250Hz : Set the crossover frequency. | ||
capability of the speaker | ||
| ||
being used. |
| |
| • “Crossover Freq.” can be set when the “Bass Setting” – “Subwoofer | |
| Mode” (vpage 103) setting is “LFE+Main”, or when you have a | |
| speaker that is set to “Small”. | |
| • Always set the crossover frequency to “80Hz”. When using small | |
| speakers, however, we recommend setting the crossover frequency to | |
| a higher frequency. | |
| • For speakers set to “Small”, sound below the crossover frequency | |
| is cut from the sound output. The cut bass sound is output from the | |
| subwoofer or front speakers. | |
| • The speakers that can be set when “Advanced” is selected differ | |
| depending on to the “Subwoofer Mode” setting (vpage 103). | |
| • When “LFE” is selected, speakers set to “Small” at “Speaker Config.” | |
| can be set. If the speakers are set to “Large”, “Full Band” is displayed | |
| and the setting cannot be made. | |
| • If set to “LFE+Main”, this setting can be made regardless of the | |
| speaker size. | |
Front Speaker Setup | 2CH DIRECT/STEREO : The front speakers used in the direct, stereo and | |
Set the front speakers to | pure direct play modes (2 channel) are set in advance. | |
use for every surround | • A : Front speaker A is used. | |
mode. | • B : Front speaker B is used. | |
NOTE | • A+B : Both front speakers A and B are used. | |
MULTI CH : The front speakers used in modes other than the direct, | ||
This can be set when “Amp | ||
stereo and pure direct play modes (2 channel) are set in advance. | ||
Assign” is set to “Front B” | • A : Front speaker A is used. | |
(vpage 102). | • B : Front speaker B is used. |
• A+B : Both front speakers A and B are used.
BD | 105 |
version Basic
version Advanced
Information