Tone

Default settings are underlined.

Adjust the tonal quality of the sound.

Setting items

Setting details

 

 

Tone Control

On : Allow tone adjustment (bass, treble).

Set the tone control function Off : Playback without tone adjustment.

to “On” and “Off”.

“Tone Control” can be set when “Dynamic EQ” (vpage 109) is set

 

 

to “Off”.

NOTE

•“Tone Control” settings are not reflected to ZONE2.

•The tone cannot be adjusted in the “DIRECT” or “PURE DIRECT” mode.

Bass

–6dB – +6dB (0dB)

Adjust bass.

“Bass” can be set when the menu “Tone Control” setting is “On”.

 

 

 

Treble

–6dB – +6dB (0dB)

Adjust treble.

“Treble” can be set when the menu “Tone Control” setting is “On”.

 

 

 

Dialogue Level

Default settings are underlined.

Sets the output level to clarify the dialogue output from the center channel.

Setting items

Setting details

 

 

Dialogue

–12dB – +12dB (0dB)

 

 

 

Audio

Subwoofer Level

Default settings are underlined.

Sets the subwoofer on/off and its output level.

Setting items

Setting details

Subwoofer

On : The subwoofer is used.

Turn subwoofer output on

Off : The subwoofer is not used.

and off.

NOTE

 

 

This can be set when the sound mode is “DIRECT” or “PURE DIRECT”

 

(vpage 71) and the “Subwoofer Mode” (vpage 123) is

 

“LFE+Main”.

Subwoofer Level

–12dB – +12dB (0dB)

Set the subwoofer output

 

level.

 

Restorer

Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The “Restorer” function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals.

Setting items

Setting details

 

 

Mode

Off : Do not use “Restorer”.

Set the mode for

Mode 1 (High) : Optimized mode for compressed sources with very weak

“Restorer”.

highs (64 kbps and under).

 

Mode 2 (Middle) : Apply suitable bass and treble boost for all compressed

 

sources (96 kbps and under).

 

Mode 3 (Low) : Optimized mode for compressed sources with normal

 

highs (96 kbps and over).

 

• This item can be set with analog signals or PCM signal (Sample Rate =

 

44.1/48 kHz) is input.

 

• “Restorer” settings are stored for each input source.

 

• This item default setting for “NETWORK” and “iPod/USB” is “Mode 3

 

(Low)”. All others are set to “Off”.

 

• This cannot be set when the sound mode is set to “DIRECT” or “PURE

 

DIRECT”.

version Basic

version Advanced

Informations

DVD

107