ENGLISH

Basic Operation

ENTER SURROUND

STANDARD PARAMETER

D H F G

STANDARD

 

SURROUND

D H F G

PARAMETER

ENTER

[ON SCREEN]

 

About the button names in this explanation

<> : Buttons on the main unit

[

] : Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

Selecting the DTS NEO:6 mode

It is possible to play analog input signals and digital input signals (2-channels) in the surround mode.

1 Press STANDARD to select “DTS NEO:6”.

DOLBY PLIIx DTS NEO:6

2 Play a program source.

3 Press SURROUND PARAMETER.

4 Press F G to select the play mode.

CINEMA:

This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.

MUSIC:

This mode is suited mainly for playing music.

5 When “MUSIC” is selected:

Press D H to select “CNTR. IMAGE” , then press F G to set.

CNTR. IMAGE:

The expansion of the center channel can be adjusted. (0.0 to 1.0, default : 0.3)

6 Press ENTER or SURROUND PARAMETER.

3 5

(When “MUSIC” is selected)

28

Basic Operation

Checking the input signals

1 Press [ON SCREEN].

Room EQ:

Displays the type of equalizer currently set.

SIGNAL:

Displays the type of input signal.

fs:

Displays the input signal’s sampling frequency.

FORMAT:

Displays the input signal’s number of channels (front / surround / LFE on/off).

“SURROUND” is displayed for 2-channel signal sources recorded in Dolby Surround.

OFFSET:

Displays the dialog normalization offset value.

FLAG:

“MATRIX” is displayed if the input signal has undergone matrix processing, “DISCRETE” is displayed if the input signal has undergone discrete processing.

2

Press [ON SCREEN] again.

• OSD-1

 

: Input signal

 

OSD-2

 

: HDMI monitor information

 

OSD-3

 

: Input/output settings

 

OSD-4

 

: Auto surround mode

 

OSD-5

~ 7

: USER MODE 1 ~ 3

 

OSD-8

~ 14

: Tuner preset stations

1

Example: Dolby Digital

Example: DTS

•“OSD-1” “FLAG” is not displayed if there is no FLAG identification signal in the input signal.

•OSD-2:

The monitor’s resolution is displayed when an HDMI monitor is connected to the AVR-2807.

•OSD-4:

This is displayed when the auto surround mode is set to “ON”

( page 23) and the input mode is set to “AUTO”.

It is not displayed when the input mode is set to “ANALOG” or “EXT. IN”.

ENGLISH