Denon AVC-3808, AVR-3808 manual 19

Except Japan model

COMMAND	PARAMETER	function	example
Z3	PHONO	MULTI ZONE-3 mode set , and select source at AVR-3808	Z3PHONO<CR>
		---The name of PARAMETER is
	IPOD	the same as that of the time of SI COMMAND.	Z3IPOD<CR>
	SOURCE	MULTI ZONE-3 mode cancel	Z3SOURCE<CR>
	UP	MULTI ZONE-3 VOLUME UP/DOWN , direct change to **dB	Z3UP<CR>
	DOWN	**:10 to 99 by ASCII , 80=0dB, 99=---(MIN)	Z3DOWN<CR>
	**		Z380<CR>
	ON	MULTI ZONE-3 ON/OFF change at AVR-3808	Z3ON<CR>
	OFF	Return Z3 Status	Z3OFF<CR>
	?		Z2?<CR>
Z3MU	ON	ZONE3 OUTPUT MUTE ON/OFF change	Z3MUON<CR>
	OFF	Return Z3MU Status	Z3MUOFF<CR>
	?		Z3MU?<CR>
Z3CS	ST	ZONE3 Channel setting	Z3CSST
	MONO	Return Z3CS Status	Z3CSMONO
	?		Z3CS?
Z3CV	FL UP	ZONE3 CHANNEL VOLUME UP/DOWN , direct change to **dB	Z3CVFL UP<CR>
	FL DOWN	---FRONT Lch	Z3CVFL DOWN<CR>
	FL **	**:38 to 62 by ASCII , 50=0dB	Z3CVFL 50<CR>
	FR UP	ZONE3 CHANNEL VOLUME UP/DOWN , direct change to **dB	Z3CVFR UP<CR>
	FR DOWN	---FRONT Rch	Z3CVFR DOWN<CR>
	FR **	**:38 to 62 by ASCII , 50=0dB	Z3CVFR 50<CR>
	?	Return Z2CV Status	Z3CV?<CR>
Z3HPF	ON	ZONE3 HPF ON/OFF	Z3HPFON<CR>
	OFF	Return Z3HPF Status	Z3HPFOFF<CR>
	?		Z3HPF?<CR>

Z3 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)

- 19 -