NETWORK SETUP of AVR-4308

>Procedure of Network Setup mode.

(1)Press SYSTEM SETUP button, then System Setup Menu appears on FL-display(and GUI) (2)Select “Network Setup > Detail” .

(3)Set parameters described below.

<DHCP>

"ON"---Use this setting when DHCP server is on the local network.

 

"OFF"---Use this setting when DHCP server is not on the local network.

<IP Address>

When <DHCP> sets "OFF”, please set IP address.

 

When <DHCP> sets "ON”, you can confirm the IP address that is set by server.

<Subnet Mask>

When <DHCP> sets "OFF”, please set Subnet Mask.

 

When <DHCP> sets "ON”, you can confirm the Subnet Mask that is set by server.

<Gateway>

Set the address of Gateway when Gateway is on the local network.

 

Do not set this parameter when Gateway is not on the local network.

<Primary DNS>

Do not set this parameter.

<Second DNS>

Do not set this parameter.

<Proxy>

Set this parameter "OFF".

<Network Option: Standby Mode Power Saving>

(1)Press MENU button, then Menu appears on FL-display (and GUI) (2)Select “Manual Setup > Network Setup > Other > Power Saving” (3)Set parameters described below.

“OFF”---Use this setting when using the AVR-4308 connected in a network. “ON”---Use this setting when not using the AVR-4308 connected in a network.

This setting is reducing the power consumption in the standby mode.

- 3 -