Erasing the code by each equipment input source
1 Press and hold POWER ON and ZONE/DEVICE ON for at least 3 seconds.
“SETUP” flashes twice on the remote control unit.
2 Use ui to display “RESET” on the remote control unit and press ENTER.
3 When “LEARN” appears on the remote control unit, press
ENTER.
4 When “MODE?” appears on the remote control unit, press the input source select button of the AV equipment that you want to
erase.
5 When “ALL?” appears, press ENTER.
“RESET” flashes four times on the remote control unit and the normal operation mode is restored.
•When the macro function is used, operations that usually require a
complicated series of multiple button operations can be performed easily just by pressing the MACRO button.
•This device can remember up to 3 macro functions.
•Each macro can record a maximum of 18 steps.
[Example] All system power on
q Turn the TV’s power on
↓
w Turn this unit’s power on
↓
e Switch this unit’s input source to DVD
↓
r Turn the DVD’s power on
nnRecording macro operations1 Press and hold POWER ON and ZONE/DEVICE ON for at least 3 seconds.
“SETUP” flashes twice on the remote control unit.
2 Use ui to display “MACRO” on the remote control unit and press ENTER.
When “MCNo? ” appears on the | |
3 remote control unit, press the | |
QUICK SELECT button that you | |
want to store. |
|
Button | Macro number |
QUICK SELECT 1 | |
QUICK SELECT 2 | |
QUICK SELECT 3 | |
4 Press the buttons to be stored one by one.
•The step number for the storing procedure and mode are alternately displayed on the remote control unit.
•You cannot store the macros for the ZONE SELECT, SOURCE SELECT and BACK LIGHT buttons.
5 Press MACRO to exit the macro function.
“SET” flashes four times on the remote control unit and the normal operation mode is restored.
Operating the main remote control unit
nnAdjusting the interval time of macro operations transmittingThe macro operation transmission interval can be adjusted.
•The factory setting is “0.5 sec”.
1Press and hold POWER ON and
ZONE/DEVICE ON for at least 3seconds.
“SETUP” flashes twice on the remote control unit.
2 Use ui to display “MACRO” on the remote control unit and press ENTER.
3 When “MCNo?” appears on the remote control unit, press the QUICK SELECT button that you want to set.
Button | Macro number |
QUICK SELECT 1 | |
QUICK SELECT 2 | |
QUICK SELECT 3 |
4 Press MACRO many times to set the macro operation transmission interval and press ENTER.
“SET” flashes four times on the remote control unit and the normal operation mode is restored.
| Remote control unit display | Time values that you can |
|
| set |
| |
|
|
| |
| 0.25 | 0.25 sec |
|
| 0.50 | 0.5 sec |
|
| 0.75 | 0.75 sec |
|
| 1.00 | 1 sec |
|
| 1.25 | 1.25 sec |
|
|
|
|
|
113
version Simple
version Basic
version Advanced
Information