Specifications
Simple
nn Audio section
• Power amplifier |
|
|
|
Rated output: | Front: |
|
|
| 140 | W + 140 | W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
| 170 | W + 170 | W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
| Center: |
| |
| 140 | W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) | |
| 170 | W (6 Ω, 1 kHz with 0.7 % T.H.D.) | |
| Surround: |
| |
| 140 | W + 140 | W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
| 170 | W + 170 | W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
| Surround back: |
| |
| 140 | W + 140 | W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
| 170 | W + 170 | W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
| Front height / Front wide: | ||
| 140 | W + 140 | W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) |
| 170 | W + 170 | W (6 Ω, 1 kHz with 0.7 % T.H.D.) |
Dynamic power: | 150 W x 2ch (8 Ω) | ||
| 220 W x 2ch (4 Ω) | ||
Output connectors: | 4 – 16 Ω |
| |
• Analog |
|
|
|
Input sensitivity/Input impedance: | 200 mV/47 kΩ |
| |
Frequency response: | 10 Hz – 100 kHz — +1, | ||
S/N: | 102 dB | ||
Distortion: | 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode) | ||
Rated output: | 1.2 V |
|
|
• Digital |
|
|
|
D/A output: | Rated output — 2 V (at 0 dB playback) | ||
| Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) | ||
| S/N ratio — 102 dB | ||
| Dynamic range — 100 dB | ||
Digital input: | Format — Digital audio interface |
nn HD Radio section | [FM] | [AM] |
| (Note: μV at 75 Ω, 0 dBf = 1 x |
|
Receiving Range: | 87.5 MHz – 107.9 MHz | 530 kHz – 1710 kHz |
Usable Sensitivity: | 1.5 μV (14.8 dBf) | 20 μV |
S/N | MONO 78 dB |
|
| STEREO 68 dB |
|
| HD 85 dB | 85 dB |
Total harmonic Distortion (at 1 kHz): | MONO 0.1 % |
|
| STEREO 0.2 % |
|
nn General | HD 0.02 % | 0.02 % |
|
| |
Power supply: | AC 120 V, 60 Hz |
|
Power consumption: | 780 W |
|
| 0.1 W (Standby) |
|
| 2.2 W (CEC standby) |
|
Maximum external dimensions: | 434 (W) x 171 (H) x 414 (D) mm | |
Weight: | 17.3 kg (38 lbs 2.2 oz) |
|
nn Main remote control unit |
| |
Batteries: | R6/AA Type (two batteries) |
|
Maximum external dimensions: | 53 (W) x 224 (H) x 30 (D) mm | |
Weight: | 178 g (6.3 oz, including batteries) |
|
nn Sub remote control unit |
| |
Batteries: | R03/AAA Type (two batteries) |
|
Maximum external dimensions: | 49 (W) x 220 (H) x 24.5 (D) mm | |
Weight: | 114 g (Approx 4 oz) (including batteries) |
|
For purposes of improvement, specifications and design are subject to change without notice.
version
version Basic
version Advanced
•Phono equalizer (PHONO input — REC OUT)
Input sensitivity: | 2.5 mV |
RIAA deviation: | ±1 dB (20 Hz to 20 kHz) |
S/N: | 74 dB (A weighting, with 5 mV input) |
Rated output: | 150 mV |
Distortion factor: | 0.03 % (1 kHz, 3 V) |
nn Video section
• Standard video connectors |
|
|
Input/output level and impedance: | 1 | |
Frequency response: | 5 | Hz – 10 MHz — +0, |
• Color component video connector |
|
|
Input/output level and impedance: | Y (brightness) signal — 1 | |
| PB / CB signal — 0.7 | |
| PR / CR signal — 0.7 | |
Frequency response: | 5 | Hz – 60 MHz — +0, |
139
Information