Sleep timer function

The power automatically goes into standby once the set time has elapsed.

This is convenient for playing sources while going to sleep.

Press SLEEP and display the time you want to set.

The indicator on the display lights.

• The time switches as shown below each time SLEEP is pressed.

OFF 10 min 20 30 40 50

120 110 100 90 80 70 60

To confirm the countdown time before putting the unit to sleep

Press SLEEP.

“Sleep : zmin” appears on the display. zz Countdown time

To cancel the sleep timer

Press SLEEP to set “OFF”.

The indicator on the display turns off.

•The sleep timer setting is canceled if this unit’s power is set to standby.

•The sleep timer function can be set separately for the different zones (vpage 74 “Sleep timer function”).

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback sources or to suit your taste, as described below.

nnAdjusting the volume of the different speakers

1 Press ZONE SELECT to switch the zone mode to M (MAIN ZONE).

The M indicator lights.

2 Press AMP to set the remote control unit to AMP-operation mode.

3 Press CH LEVEL.

CHANNEL LEVEL

Front L -8.0dB

Front R -12.0dB

Subwoofer1 0.0dB

Subwoofer2 0.0dB

Subwoofer ON

4 Use ui to select the speaker.

The speaker that can be set switches each time one of the buttons is pressed.

5 Use o p to adjust the volume.

•You can directly turn “OFF” the subwoofer outputs during 2-channel playback in DIRECT or STEREO mode.

Select “Subwoofer” and use o p to select “ON” or “OFF”.

CHANNEL LEVEL

Front L -8.0dB

Front R -12.0dB

Subwoofer OFF

Convenient functions

nnAdjusting the volume of groups of speakers (Fader function)

This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / front wide speaker / center speaker) or rear (surround speaker / surround back speaker).

1

Press ZONE SELECT to switch the zone mode to M

(MAIN ZONE).

 

The M indicator lights.

2 Press AMP to set the remote control unit to AMP-operation mode.

3 Press CH LEVEL.

4 Press i to select “Fader”, then select the item to be adjusting using o p.

CHANNEL LEVEL

 

 

 

 

 

Front L

 

-8.0dB

 

 

 

 

 

 

 

 

 

 

 

Front R

-12.0dB

 

 

 

 

 

Front Height L

0.0dB

 

 

 

 

 

Front Height R

0.0dB

 

 

 

 

 

Front Wide L

-12.0dB

 

 

 

 

 

Front Wide R

-10.0dB

 

 

 

 

 

Center

 

0.0dB

 

 

 

 

 

 

 

 

 

 

 

Subwoofer1

 

0.0dB

 

 

 

 

 

Subwoofer2

 

0.0dB

 

 

 

 

 

Surround L

-12.0dB

 

 

 

 

 

Surround R

-10.0dB

 

 

 

 

 

Fader

 

Front

 

 

Rear

 

 

 

 

 

 

 

 

 

5 Use o p to adjust the volume of the speakers. (o : front, p: rear)

•The fader function does not affect the subwoofer.

•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of –12 dB.

When a headphone jack is inserted, the headphone channel level can be adjusted.

66