106
Advanced Setup – Part 1
Video Setup
•Make the video-related settings.
Setting the HDMI / DVI In Assignment
•This setting assigns the HDMI input terminals and DVI input
terminal for different input sources.
•Set the method for playing the audio signals included in the
HDMI input signal.
2Press the CURSOR DDor HHbutton to select
“HDMI / DVI In Assign”, then press the ENTER
button.
•Display the “HDMI / DVI In Assign” screen.
3Press the CURSOR DDor HHbutton to select the
input source, then press the CURSOR FFor GG
button to select the input terminal.
Select from among HDMI1 to 3 and DVI-D.
If the same HDMI or DVI input terminal is selected, the
setting for the input source that was previously
assigned switches to “NONE”.
4Press the CURSOR DDor HHbutton to select the
method for playing the audio signals included
in the HDMI input signal, then press the
CURSOR FFor GGbutton to select “AMP” or
“TV”.
AMP:
Play the audio signals on speakers connected to
the AVR-4806CI.
TV:
Play the audio signals on a TV connected to the
AVR-4806CI.
5Press the CURSOR DDor HHbutton to select the
input for the playback of signals when the
audio signal of HDMI can not be reproduced,
then press the CURSOR FFor GGbutton to select
the input signal (EXT. IN orANALOG).
6Press the ENTER button to enter the setting.
•The “Video Setup” menu reappears.
If there is no HDMI audio signal, the signal
automatically switches to the input from the set
terminal.
1~3 correspond to each HDMI 1~3 input terminal.
1Press the CURSOR DDor HHbutton to select
“Video Setup” at the “System Setup Menu”,
then press the ENTER button.
•Display the “Video Setup” menu screen.