68
Basic Operation
RDS search
1Set the input source to “TUNER”.
3Press the RDS SEARCH button until “RDS
SEARCH” appears on the display.
•Use this function to automatically tune to FM stations that
provide RDS service.
RDS SEARCHFM PTY SEARCH
RT ON TP SEARCH
Display
The main unit’s display switches as follows each time
the RDS SEARCH button is pressed.
CURSOR
FG
CHANNEL
CURSORFG
RDS SEARCH
TU
(Main unit) (Remote control unit
in the AMP mode)
4Press the CHANNEL button.
•Automatically begin the RDS search operation.
If no RDS stations is found with above operation, all
the reception band are searched.
When a broadcast station is found, that station’s name
appears on the display.
5To continue searching, repeat step 3.
If no other RDS station is found when all the
frequencies are searched, “NO RDS” is displayed.
2Press the TU (TUNER)
button to select the TUNER
mode.
(Remote control unit)