69
Basic Operation
5Press the CHANNEL button.
•Automatically begin the PTY search operation.
If there is no station broadcasting the designated
program type with above operation, all the reception
bands are searched.
The station name is displayed on the display after
searching stops.
PTY search
1Set the input source to “TUNER”.
3Press the RDS SEARCH button until “PTY
SEARCH” appears on the display.
The main unit’s display switches as follows each time
the RDS SEARCH button is pressed.
•Use this function to find RDS stations broadcasting a
designated program type (PTY).
•For a description of each program type, refer to “Program
Type (PTY)”.
RDS SEARCHFM PTY SEARCH
RT ON TP SEARCH
Display
4Watching the display, press the CURSORFFor
GGbutton to call out the desired program type.
6To continue searching, repeat step 3.
If no other station broadcasting the designated
program type is found when all the frequencies are
searched, “NO PROGRAMME” is displayed.
(Main unit)
TP search
1Set the input source to “TUNER”.
3Press the RDS SEARCH button until “TP
SEARCH” appears on the display.
•Use this function to find RDS SEARCH stations broadcasting
traffic program (TP stations).
RDS SEARCHFM PTY SEARCH
RT ON TP SEARCH
Display
The main unit’s display switches as follows each time
the RDS SEARCH button is pressed.
(Main unit)
(Remote control unit
in the AMP mode)
2Press the TU (TUNER)
button to select the TUNER
mode.
(Remote control unit)
(Remote control unit
in the AMP mode)
2Press the TU (TUNER)
button to select the TUNER
mode.
(Remote control unit)