ENGLISH
13 SURROUND
Before playing with the surround function
•Before playing with the surround function, be sure to use the test tones to adjust the playback level from each speakers. This adjustment can be performed from the remote control unit, as (described) below.
•The adjustment with the test tones is only effective in the DOLBY/DTS SURROUND modes.
The adjusted playback levels for the different surround modes are automatically stored in the memory of each surround modes.
1 | Set the DOLBY/DTS SURROUND (Dolby Pro Logic II or Dolby |
| |
| Digital or DTS) modes. |
| (Main unit) | (Remote control unit) |
2 | Press the TEST TONE button. |
|
(Remote control unit)
Test tones are output from the different speakers. Use the channel volume adjust buttons to adjust so that the volume of the test tones is the same for all the speakers.
(Remote control unit)
NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.
3 | After completing the adjustment, press the TEST TONE button |
| |
| again. |
(Remote control unit)
1
1
2
2
2, 3
37