ENGLISH
Basic Operation
FUNCTION INPUT MODE
STANDARD/NIGHT
Night mode
When listening at night or at lower volumes, the night mode improves listenability.
Press and hold the NIGHT button for several seconds to enter the night mode.
•Canceling night mode:
Press and hold the NIGHT button again.
•The night mode only works when playing program sources recorded in Dolby Digital or DTS.
STANDARD 
FUNCTION 
ENTER
CURSOR
INPUT MODE 
Adjusting the audio delay
•When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture.
•The audio delay setting is stored separately for each input source.
• This | adjustment can be performed with the system setup |
( | page 42) or from the remote control unit, as described |
below.
1 Select the input source.
Example: DVD
(Main unit) | (Remote control unit) |
2 Press the INPUT MODE button to set the input mode to “AUTO”.
3 Select Dolby/DTS Surround.
(Main unit) | (Remote control unit) |
25
Basic Operation
4
5
•Switch to the Audio Delay adjustment screen.
6 Press the CURSOR F or G button to set the
With a movie source, for example, adjust so that the movement of the actors’ lips is synchronized with the sound.
7 Press the ENTER button to complete the setting.
•The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct or stereo mode.
ENGLISH