Recording using the REC OUT selector

1

Press the REC SELECT button.

 

 

REC SELECT

 

 

 

 

(Main unit)

 

 

 

 

 

2

With “REC OUT SOURCE” displayed,

FUNCTION

 

 

 

 

turn the FUNCTION knob to select the

 

 

 

source you wish to record.

 

 

 

•

The “REC” indicator and the indicator

 

 

 

 

of the selected source light.

 

 

 

 

 

(Main unit)

 

 

 

 

 

3

Set the recording mode.

 

 

 

 

 

 

• For operating instructions, refer to the

manual of the

 

 

 

component on which you want to record.

 

 

 

 

4

To cancel, turn the function knob and select “SOURCE”.

 

FUNCTION

 

(Main unit)

ENGLISH

Display

NOTES:

•Digital signals are not output from output jacks.

•Only the currently playing source can be recorded to CDR/TAPE.

Playback using the external input (EXT. IN) jacks

1

Set the external input (EXT.

 

 

EXT.IN

EXT.IN

 

IN) mode.

 

 

 

Press the EXT. IN to switch

 

 

the external input.

 

 

(Main unit)

(Remote control unit)

Once this is selected, the input signals connected to the FL (front left), FR (front right) and C (center) channels of the EXT. IN jacks are output directly to the front (left and right) and center speaker systems as well as the pre-out jacks without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SUBWOOFER jack.

2

Cancelling the external input mode

 

 

 

 

To cancel the external input (EXT. IN) setting, press the INPUT

 

MODE (AUTO, PCM, DTS) or ANALOG button to switch to

 

the desired input mode. (See page 32.)

 

 

INPUT MODE ANALOG

 

 

INPUT MODE

ANALOG

(Main unit)

(Remote control unit)

•When the input mode is set to the external input (EXT. IN), the play mode (DIRECT, STEREO, DOLBY/DTS SURROUND, 5CH STEREO or DSP SIMULATION) cannot be set.

 

VOLUME

 

DISC SKIP+

 

 

 

DOLBY / DTS

 

 

 

SPEAKER

SURROUND

DIRECT

 

 

DSP SIMULATION

5CH STEREO STEREO

 

 

 

 

 

MASTER VOL.

 

2

INPUT MODE

ANALOG

EXT.IN

1

AUDIO

 

DECK

CDR/MD

 

 

CD

MUTING

 

 

AVR/AVC

VIDEO

DVD

TV

 

 

 

 

VDP

VCR

 

 

 

 

SYSTEM

SURROUND

 

 

TUNING

SETUP

PARAMETER

 

 

BAND

 

TITLE

MENU/GUIDE

 

 

 

 

 

 

 

 

 

 

CH SELECT

 

 

MODE

 

 

ENTER

 

 

 

 

 

SELECT

 

NOTES:

•In play modes other than the external input mode, the signals connected to these jacks cannot be played. In addition, signals cannot be output from channels not connected to the input jacks.

•The external input mode can be set for any input source. To watch video while listening to sound, select the input source to which the video signal is connected, then set this mode.

35