37
ENGLISH
7Press the ENTER button to enter the
settings.
•The next screen in the system setting
changing menu appears.
ENTER
Remote control unit
To cancel the settings after the adjustments have been made
Display the channel level adjustment screen, then use the •, ª, 0
and 1cursor buttons to select “Level Clear” and select “Yes ”.
The level settings for all the speakers are set to 0 dB.
NOTE:
When the channel levels are adjusted at the channel level settings,
the adjusted values are applied to all playback modes.
[4] DVD Auto Power Off setting
•The ADV-M71 is equipped with a function for automatically setting
the power to the standby mode if no operation is performed for 30
minutes when the function is set to DVD. Here set whether to use
this function or not.
•By factory default this is set to “No”.
1If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
2At the system setting changing menu screen, use the 0and
1cursor buttons to select “DVD AUTO POWER OFF”, then
press the ENTER button.
•The DVD auto power off setting screen appears.
ENTER
Remote control unit Remote control unit
3Use the 0and 1cursor buttons to select the “Auto Power
Off” mode.
BYes: The function for automatically turning the power off
when the function is set to DVD is activated.
BNo: The auto power off function is not activated.
4Press the ENTER button to enter the
settings.
•The next screen in the system setting
changing menu appears.
ENTER
Remote control unit
3Use the •and ªcursor buttons to select the item to be set,
then use the 0and 1cursor buttons to make the settings.
BLINE-1 Function name selection (“MD” by default)
MD
CD-R
AUX MD/CD-R
BLINE-2 Function name selection (“TAPE” by default)
TAPE D.AUXAUX
BLINE-1/LINE-2 REC OUT
: Set whether to turn the recording output during playback in
the Dolby Virtual Speaker mode when the function set to
DVD or the D.AUX exclusive digital input on or off.
On : The signals are output in stereo. (Factory default)
Off : The signals are not output. (Recording is not
possible.)
[5] Function settings
•Set the LINE-1 and LINE-2 function names and turn the analog
recording output (REC OUT) on or off.
•When used in combination with the D-M31 series, set according to
the components being used and make system connections for
convenient system functions.
•It is also possible to assign the D.AUX digital input to LINE-2.
1If you are not at the system setting changing menu screen,
read step 1 and 2 on page 33.
2At the system setting changing menu screen, use the 0and
1cursor buttons to select “FUNCTION ASSIGNMENT”, then
press the ENTER button.
•The input function setting screen appears.
ENTER
Remote control unit Remote control unit