ENGLISH
98
(4) “AUDIO SETUP” is selected
3Use the 0and 1cursor buttons to select the “AUDIO
SETUP”, then press the ENTER button.
•DIGITAL OUT
Use this to select the digital output’s signal format.
•LPCM (44.1 kHz / 48 kHz)
Use this to set the digital audio output when playing
DVDs recorded in linear PCM audio.
To exit the audio setup mode
Use the •and ªcursor buttons to select “> NEXT DVD
MENU”, then press the ENTER button.
•The screen returns to as it was in step 2.
Use the •and ªcursor buttons to select the desired
setting, then press the ENTER button.
2When “DIGITAL OUT” is selected.
•NORMAL (Factory default)
Make the selection when playing back in surround
playback a DVD that has been recorded with Dolby Digital
or DTS on this unit.
The Dolby Digital or DTS digital signal is also output from
the digital output jacks.
•PCM
DVDs that were recorded in Dolby Digital DTS are
converted to linear PCM 48 kHz/16 bit (2 channels). Make
the selection when making a digital recording.
To exit the digital out mode
Press the ENTER button, you can go back to the previous
screen.
Remote control unit
Remote control unit
ENTER
Remote control unit
Remote control unit
ENTER
d
d
4
1
See page 91.
2