Denon DCM-370 - page 13

ENGLISH

oAudible quick search……………………………………… Manual Search

•Using this function, you can cue to a desired point within a track, either in

the forward or reverse direction.

•Release the Automatic/Manual search button (8/6or 7/9) when

the desired point has been reached. Normal playback then continues.

(1) Manual Search Forward

OPEN/CLOSEDISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

STOP PAUSE PLAY

PROG

PHONES

REPEAT

DCM-370

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER

REMOTE

SENSOR

HDCD

£¢ON OFF

TRACK 1

5234

678

9101112

13141516

DISC MIN SEC

‚⁄

‚‹ﬁ

‚

( 7/9 )

1. Keep on pressing the Automatic/Manual search forward button (7/9)

for more than 0.5 seconds during playback. Playback of the track is sped

up.

•As a reference, the current track number and elapsed playback time within

the track are displayed.

•Manual search forward is approximately 4 times faster when the

Automatic/Manual search forward button (7/9) is kept on pressing

more than 5 seconds.

•If the Automatic/Manual search forward button (7/9) is kept pressed

after the end of the final track on the disc is reached, ( ) is displayed and

manual search stops. To return to another point, press the

Automatic/Manual search reverse button (8/6) until ( ) disappears.

•If the Automatic/Manual search forward button (7/9) is kept on

pressing and the end of the current track is reached during random play or

programmed play, the next track is searched and playback starts.

1. Keep on pressing the Automatic/Manual search reverse button (8/6)

for more than 0.5 seconds during playback. Reverse playback of the track is

sped up.

•As a reference, the current track number and elapsed playback time within

the track are displayed.

•Manual search in reverse is approximately 4 times faster when the

Automatic/Manual search reverse button (8/6) is kept on pressing

more than 5 seconds.

•If the Automatic/Manual search reverse button (8/6) is kept pressed

after the beginning of the first track on the disc is reached, ( ) is displayed

and manual search stops. To return to another point, press the

Automatic/Manual search forward button (7/9) until ( ) disappears.

•If the Automatic/Manual search reverse button (8/6) is kept on

pressing and the beginning of the current track is reached during random

play or programmed play, the manual search in reverse is canceled and

playback starts.

!0 To Cue and Stop Play………………………………………………… Pause

(Remote control only)

(1) Cuing by Direct Selection

•Cuing by direct selection, then entering the Pause state, is convenient for

practicing vocals with background music.

( 3 PAUSE )

( 1 ~ 10 )

1. Press the Track Number buttons to set the number of the desired track.

2. Press the Pause (3PAUSE) button.

•To start play, press the Play (1PLAY) button or the Pause (3PAUSE)

button.

(2) Cuing by Program Selection

•After setting the desired track selections in a program, press the Pause (3

PAUSE) button. The player will advance to the beginning of the 1st track in

program memory and wait in the Pause state.

!1 Synchronized Recording

Function …………………………… Synchronized Recording Function

Connecting the SYNCHRO jack with a DENON cassette deck which is

equipped with a SYNCHRO jack will allow synchronized recordings to be made.

•To use this function, be sure to connect the SYNCHRO jacks as well as the

output terminal (LINE OUT). (Refer to page 9 for connections.) Then, load a

disc.

•With the CD player in the stop or pause condition, starting a synchronized

recording at the cassette deck side will automatically cause the CD player to

start playing. (This is synchronized play.)

•The remote control indicator of the display will blink during synchronized

play.

NOTES:

•Synchronized play is also possible in the program mode.

•The repeat mode are cancelled when synchronized play is started.

•Except for the Stop (2STOP), Play (1PLAY) and TIME buttons, the buttons

will not operate during synchronized play.

•In the play condition, even if you start a synchronized recording at the

cassette deck side, CD player will not synchronize with the cassette deck

and the cassette deck becomes synchronized pause condition. In this case

push the Stop (2STOP) button of the cassette deck, set the CD player in

the stop or pause condition and start a synchronized recording at the

cassette deck side again.

•For further details, see the owner’s manual for the cassette deck that has

been connected.

iTo Stop Play Temporarily …………………………………………… Pause

OPEN/CLOSEDISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

STOP PAUSE PLAY

PROG

PHONES

REPEAT

DCM-370

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER

REMOTE

SENSOR

HDCD

£¢ON OFF

TRACK 1

5234

678

9101112

13141516

DISC MIN SEC

‚⁄

‚‹ﬁ

‚

( 3 PAUSE )

•Pressing the Pause button during play stops play at that point.

Pressing the Pause button once more starts play again from the same point.

1. Press the Pause (3PAUSE) button.

4th Track 5th Track 6th Track

Pause

2. Press the Play (1PLAY) button or the Pause (3PAUSE) button to start

play.

(2) Manual Search in Reverse

OPEN/CLOSEDISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

STOP PAUSE PLAY

PROG

PHONES

REPEAT