17
Basic operation
1Press POWER.
The unit is powered ON, and DECK CHG. and the track selection
knob light up.
2Select the input source for each channel using
channel input source switch knob.
For LINE1 and LINE2 input terminals, you can switch between
“PHONO” and “LINE”. For information about setting up these
terminals, see “Connecting external devices and MIC” in page
9.
3Use LEVEL to adjust the input level.
The input level is displayed in the CUE master level meter.
4Use HI/MID/LOW to adjust the audio quality.
5Use the channel fader and cross fader to adjust the
volume.
6Use MASTER LEVEL to adjust the output level.
nAdjust the cross fader curve
Adjusts the startup response of the cross fader.
Beforehand, use the cross fader assignment switch on the front panel
to set each channel to the cross fader A and B.
Turn X FADER CONTOUR to adjust the curve response of
the cross fader.
: Slow startup curve characteristics (nine steps).
: Sharp startup characteristics, with cut-in/cut-out.
Basic operation
MIC (Mic input)
1Press MIC ON 1 to use MIC1 and MIC ON 2 to use
MIC2.
When you press the button, it lights up and the MIC input is
switched ON.
2Use MIC1 LEVEL or MIC2 LEVEL to adjust the MIC
input level.
3Use MIC1 HI/MID/LOW or MIC2 HI/MID/LOW to
adjust the MIC audio quality.
nEchoing the MIC input
q Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.
• When you press the button, it lights up and the echo is
switched ON.
w Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.
nEnabling the ducking function
The ducking function detects the MIC input and attenuates the audio
signal level of the master output. This prevents MIC audio from being
inaudible under loud music.
Press DUCKING.
• DUCKING lights up.
nOutputting MIC audio to external devices
You can output MIC audio together with the master audio from the
booth/send and REC output terminals.
Press POST.
• POST lights up.
POWER
MIC1 HI/MID/LOW
PHONES
ECHO
PHONES
LEVEL
PAN
SPLIT CUE CUE
MIC2 HI/MID/LOW X FADER CONTOUR
LEVEL
POST
MIC1 LEVEL
MIC2 LEVEL
MIC ON 1/2
DUCKING
ECHO ON 1/2
HI/MID/LOW
DECK CHG.
MASTER LEVEL
DECK CHG.
This section describes operations of the unit without using the DJ software.
• For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
• For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.
• TRACTOR······Page 3, 4
• Virtual DJ······Page 5, 6
Channel fader
Cross fader Track selection
knob
Cross fader
assignment switch
Mixing mode selector switch
USB audio output source selector switch
Channel input
source switch
knob