5BASIC OPERATION
Play and pause
ENGLISH
• Each push of the y PLAY/PAUSE (13) button |
switches between playback and pause. y |
PLAY/PAUSE (13) button illuminates solid green |
during playback and flashed in pause. |
• When the y PLAY/PAUSE (13) button is pushed |
during play, the |
| Push the !8DISC MODE | DISC MODE |
| button to set o Scratch | |
2 |
| |
Disc to search mode. The | ON SCRATCH | |
OFF SEARCH/ | ||
| !8DISC MODE button | BEND |
| LEDs will turn off. |
|
•When the @3PARAMETERS knob is pushed the pitch
3range is entered and the pitch range selection mode
is cancelled.
PARAMETERS
PUSH
TRACK SEARCH MP3 SEARCH MODE
point. Push y PLAY/PAUSE (13) button once |
again and playback resumes. |
• Playback will pause when SCRATCH is selected |
with the !8DISC MODE button and the scratch disc |
is held with your hand. Playback resumes when |
your hand is released. |
Play and Cue
•When the i CUE button is pushed during playback, the track stops and returns to the original position of which playback started from, the (Cue point). This function is also called
•You can set and change Cue point as follows.
•When you started playback.
•Track select finished.
•manual search.
Select the track
•Turn the @3TRACK knob.
•By pushing @3TRACK knob down while turning, the tracks will increment 10 at a time.
!Move the Cue point
•If you would like to start playback other from the beginning of the track, you need to move Cue Point using fast Search and manual search function.
You can move to the approximate playback start position by @4or @5FAST SEARCH buttons.
[QUICK JUMP]
• If the FAST SEARCH button is tapped shortly, the
1 playback position jumps about 10 seconds. The jump time can be selected in the preset mode from 10,20,30 or 60 sec.
[FAST SEARCH]
•When the FAST SEARCH button is pressed and held in, the disc is
Turn the o Scratch Disc to change Cue point. You can hear the short sound of the current
3Cue point.
When o Scratch Disc is turned in the pause, Cue or frame repeat mode, it works as the manual search function.
After you found your
4 | preferred Cue point, push | CUE | |
the i CUE button then a | |||
| |||
| new Cue point is set. | CUE/STUTTER | |
|
|
Adjusting the pitch
•With Pitch slider you can adjust the playback speed (Pitch).
•If you would not prefer to change key of sound, use the Key Adjust function.
Push the @9 PITCH/KEY | PITCH/KEY |
button to PITCH LED lights up. |
|
1 |
| RANGE |
|
| |
| • | PITCH → KEY (key adjust) → OFF |
|
| Pitch decreases |
|
| Move the @8Pitch slider to adjust |
2 | 0 | the pitch. The current pitch setting |
|
| is displayed on the display. |
|
| Pitch increases |
RANGE button is pushed for more than 1 sec,
3the pitch range can be selected 
PITCH/KEY with the @3 PARAMETERS
knob.
RANGE
Pitch Bend
•With PITCH BEND function you can change pitch temporary.
[PITCH BEND +/– buttons]
• Push the @6PITCH BEND
– or @7+ button for momentary change of
1pitch.
While holding these buttons down, the pitch continues to change up to the limitation.
•After releasing the PITCH BEND buttons, playback pitch returns to slider setting.
[Scratch Disc]
•When the disc mode is set to SEARCH/BEND with the !8DISC
MODE button, the playback speed
2can be changed by turning o Scratch Disc during playback.
Power on play
•When “POWER ON PLAY” is set to “ON” at “⁄4 PRESET (10)”, playback starts from the first track on the disc when the power is turned on.
11