9
ENGLISH
W
Specifications
nTurntable section
Driving system: Servo system direct drive
Speed: 33–1/3rpm, 45rpm
Wow & flutter: Less than 0.1 % WRMS
Starting time: Specified speed within 0.3 sec (for 33 rpm)
Turntable: Aluminum die-cast, 331 mm (13-1/32”) in diameter
Motor: Direct-drive motor
Speed control system: Quartz control
Load characteristics: 0 % with the stylus pressure 80 g (2.8 oz)
Speed deviation: Within ± 0.003 %
nTone arm section
Arm form: Static balance S-shaped pipe arm
Effective arm length: 244 mm (9-39/64”)
Overhang: 14 mm (35/64”)
Tracking error: within 3°
Arm height adjustable range: about 6 mm (15/64”)
Stylus pressure variable range: 0 to 4.0 g (0.14 oz)
One step 0.1 g
Suitable cartridge empty weight: 4 to 10 g (0.14 oz to 0.35 oz)
Head shell weight: 18 g (0.63 oz, including screws, nuts, nylon washers)
Cartridge spacer weight: 0.25 g (0.01 oz, 1 sheet)
nTotal
Power supply: AC 120 V, 60 Hz
Power consumption: 10 W
Maximum external dimensions: With dust cover closed:
490 (W) ×213 (H) × 405 (D) mm (19-19/64” x 8-25/64” x 15-15/16”)
With dust cover open:
490 (W) ×515 (H) × 465 (D) mm (19-19/64” x 20-9/32” x 18-5/16”)
Weight: 15.7 kg (0.55 oz)
nCartridge (DL-A100)
Power generation method: Moving coil (MC) type
Output voltage: 0.3 mV (1 kHz 50 mm/sec horizontally)
Channel balance: within 1 dB (1 kHz)
Channel separation: more than 25dB (1 kHz)
Impedance: 40 Ω ± 20 %
Compliance: 5 × 10-6 cm/dyne (used 100 Hz record)
Stylus tip: 0.2 mm (1/64”) square solid diamond
Stylus pressure: 2.5 g ± 0.3 g (0.09 oz ± 0.01 oz)
Frequency response: 20 Hz to 45 kHz
Weight: 8.8 g (0.31 oz)
Load resistance: more than 100 Ω (40 Ω when a transformer is used)
Maximum external dimensions: 15 (W) × 15 (H) × 26.8 (D) mm (19/32” x 19/32” x 1-1/16”)
zFor purposes of improvement, specifications and design are subject to change without notice.
1.DP-A100E3_ENG_004_0825.indd 9 2010/08/26 8:59:09