Denon DVD-1730 manual 15

DISC PLAYBACK

		Basic Playback								Brightness of the Front Panel Display
										Press the DIMMER button on the front panel to
			DVD	CD	MP3	JPEG	WMA		1
										select the desired brightness of the front panel dis-
Getting started
										play. (BRIGHT, DIMMER or OFF)
• Turn on the power of the TV, amplifier and any other com-										• The default setting is BRIGHT.
	ponents which are connected to the DVD player.
								NOTES:
• Make sure the TV and audio receiver (commercially avail-
	able) are set to the correct channel.									• The brightness of the front panel display can be adjust-
		Press the POWER ON button.								ed from the setup menu. Details are on page 25.
	1
		• “P-ON” will appear briefly on the display panel.								• When you turn on the power next time, the brightness
										of the front panel display will be as set in setup menu.
	2	Press the OPEN/CLOSE button
		to open disc loading tray.								General Features
	3
		Place the disc in the tray, with the
		label facing up.									DVD
	4	Press the PLAY button.
								DVD may contain menus to navigate the disc and access spe-
		• The tray will close automatically,
								cial features. Press the appropriate Numeric buttons or use the
		then playback will start from the first
								Cursor buttons (K / L / s / B) to highlight your selection in the
		chapter or track of the disc. If the playback does not
								DVD main menu and press the ENTER button to confirm.
		start automatically, press the PLAY button.
								NOTE:
		• When you play back the DVD with a title menu, it may
										• Unless otherwise stated, all operations described in this
		appear on the screen. In this case, refer to “Title Menu”.
										manual are based on remote control use. Some operations
	5	Press the STOP button to stop playback.
										can be carried out using the menu bar on the TV screen.
NOTES:

English

•A “prohibited icon” may appear at the top-right corner on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc.

•With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.

•During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

•The operation may vary when you play back DVDs with disc menu. Refer to the manual accompanying the disc for details.

HDMI Setup

Disc Menus

DVD

1Press the MENU button.

• The DVD main menu will appear.

2 If the feature is not available,	symbol may
appear on the TV screen.

3If disc menu is available on the disc, audio lan- guage, subtitle options, chapters for the title and other options will appear for selection.

4Press the Cursor buttons (K / L / s / B) to select an item, and the ENTER button to confirm the selection.

Press the HDMI button on the front panel to select

Title Menu

1

the HDMI output mode.

DVD

The output mode changes as follows every time

the HDMI button is pressed.

Press the TOP MENU button.

1

• The HDMI indicator on the front panel lights up when

• The title menu will appear.

HDMI output mode is on.

2

If the feature is not available,

symbol may

480P

720P

1080

OFF

appear on the TV screen.

3

Press the Cursor buttons (K / L / s / B) to select an

item, and the ENTER button to confirm the selection.

• Playback will begin at the selected title.

480P (Default):

CALLING UP A MENU SCREEN DURING PLAYBACK

Video output from the HDMI OUT jack at 480p.

720P

: Video output from the HDMI OUT jack at 720p.

DVD

1080

: Video output from the HDMI OUT jack at 1080i.

• Press the MENU button to call up the DVD main menu.

OFF : No video output from the HDMI OUT connector.

• Press the TOP MENU button to call up the title menu.

NOTES:

NOTE:

• Video and audio signals may distorted temporarily

when switching to/from the HDMI output mode.

• Contents of menus and corresponding menu opera-

• Use a display equipment with an HDMI-compatible port.

tions may vary among discs. Refer to the manual

• The unit is sending Progressive video signal and HDMI

accompanying the disc for details.

signal simultaneously when HDMI mode is set to ON. If

Still / Pause

you connected component video cable to your TV, which

is not compatible with progressive scan, the distorted pic-

ture will be output.

DVD

CD

MP3

JPEG

WMA

• The HDMI indicator on the front panel flashes when you

1

During playback, press the

select the HDMI output mode but there is no HDMI cable.

F

• You can check the HDMI connection status by pressing

STILL/PAUSE button.

the DISPLAY button during playback with the HDMI

• Playback will pause and sound

output mode (refer to page 20).

will be muted.

• If the TV is not compatible with newly selected HDMI

2

To continue playback, press the PLAY button.

output mode, the actual output mode will be kept the

NOTE:

one before changing the selection. When this occurs,

the newly selected mode will appear on the front panel

• On DVDs, set “STILL MODE” to “FIELD” on the display

display (see page 10) while the actual output resolution

menu if pictures in the pause mode are blurred (refer to

will be indicated by performing the on-screen display as

page 23).

described on page 20.

• You cannot select the HDMI output mode when the

setup menu is on the TV screen.

– 15 –

EN