ENGLISH
ENGLISH
Making the initial settings Making the initial settings
18
1
2
3

Use [DD HH]to select “TEST TONE”, use [FF GG]again

to make the settings, then press [ENTER].

2
OFF:
No test tones are output.

At the HDMI speaker setting screen, use [DD HH]to

select “CHANNEL LEVEL”, then press [ENTER].

1

If “AUTO” is selected:

Use [FF GG]to adjust the volume.

The volume can be adjusted between the range of 0 to –10 dB.
The test tones are output automatically in the order shown
below.
3
-1
AUTO:
Adjust the volumes while listening to the test tones output
automatically from the different speakers.
MANUAL:
Switch the speaker from which the test tone is output manually as
you adjust the volumes.

If “MANUAL” is selected:

Use [DD HH]to select the speaker, use [FF GG]to adjust

the volume, the press [ENTER].

3
-2

¢Channel level

Set the volume of the different speakers so that the test tones output
from them sound to have the same volume.
1
2
3
-1
3
-2
4
The display differs
depending on the
connected speaker.
•To return to the setting screen:
Press [RETURN].
•To return to the setting screen:
Press [RETURN].
FRONT LCH FRONT RCH
SUBWOOFER SURROUND LCH SURROUND RCH
CENTER