Denon DVM-2845CI 12

FUNCTIONAL OVERVIEW

Displays During Operation

• “A-CLEAr” is displayed on the front panel display while

selecting ALL CLEAR.

Power on

• “SHUFFLE” is displayed on the front panel display while

setting the random playback.

• “5-SHUFF” is displayed on the front panel display while

No disc inserted or

setting the 5 Disc random playback.

cannot read

• “A-PLAY” is displayed on the front panel display while

setting the all group playback.

Tray open

Loading the Batteries

1. Open the battery compartment cover.

Tray closed

Loading the Disc

2. Insert two “AA” (R6P) batteries, with each one

oriented correctly.

Power off

HDMI output mode

3. Close the cover.

(480p) is selected

HDMI output mode

(720p) is selected

Cautions On Batteries

HDMI output mode

• Use “AA” (R6P) batteries in this remote control unit.

• Replace the batteries with new ones approximately once

(1080i) is selected

a year, though this depends on the frequency with which

HDMI output mode

the remote control unit is used.

(1080p) is selected

• If the remote control unit does not operate within a close

proximity of the main unit, replace the batteries with new

HDMI output mode

ones, even if less than a year has passed.

(OFF) is selected

• The included batteries serve only for verifying operation.

Replace them with new batteries as soon as possible.

Super Audio CD setup

• When inserting the batteries, be careful to do so in the

(2CH AREA) selected

proper direction, following the

and

marks in the

Super Audio CD setup

remote control unit’s battery compartment.

(MULTI-CH AREA) selected

• To prevent damage or battery fluid leakage:

• Do not mix a new battery with an old one.

Program playback is

• Do not mix two different types of batteries such as

set

alkaline and manganese.

• Do not short-circuit, disassemble, heat or dispose of

Program playback

batteries in flames.

setting disc is selected

• Remove the batteries when not planning to use the

Program playback setting

remote control unit for a long period of time.

group (folder) is selected

• If the batteries should leak, carefully wipe off the fluid from the

inside of the battery compartment, then insert new batteries.

Program playback setting

ALL CLEAR is selected

Using a Remote Control

Random playback is

Keep in mind the following when using the remote control:

set

• Make sure that there are no obstacles between the remote

control and the remote sensor on the unit.

5 Disc random

• Remote operation may become unreliable if strong sunlight or

playback is set

fluorescent light is shining on the remote sensor of the unit.

All group playback

• Remote control for different devices can interfere with each

is set

other. Avoid using remote control for other equipment locat-

ed close to the unit.

Tray rotation

• Replace the batteries when you notice a fall off in the oper-

ating range of the remote control.

AC cord plugged in

• The maximum operable ranges from the unit are as follows.

- Line of sight: approx. 23 feet (7m)

- Either side of the center: approx. 16 feet (5m) within 30˚

NOTES:

- Above: approx. 16 feet (5m) within 15˚

• The front panel display has blinked while setting the

- Below: approx. 10 feet (3m) within 30˚

program playback.

• “P**-●●●” is displayed on the front panel display while

setting the program playback. (“**” is program number,

“●●●” is track number.)

• “A” is displayed on front panel display while selecting the

audio file (CD, MP3, WMA, Super Audio CD, DVD-Audio).

• “F-***” is displayed on the front panel display while selecting

the group (folder). (“***” is group (folder) number.)

16 feet (5m) 23 feet (7m)

16 feet (5m)

30˚

– 12 –