DVD SETUP
STILL MODE (Default : AUTO) |
|
|
|
| Audio Setting |
|
|
| ||||||
• Press the Cursor buttons (K or |
|
|
| You can change some Audio settings. It only affects during the | ||||||||||
L) for an item selection (AUTO, |
| DISPLAY | ||||||||||||
| STILL MODE |
| ||||||||||||
FIELD, or FRAME), then press |
|
|
| playback of DVD discs. |
|
|
| |||||||
AUTO |
|
|
|
|
| |||||||||
the ENTER button. | FIELD |
| Press the SETUP button in stop mode. | |||||||||||
FRAME | 1 | |||||||||||||
|
|
| ||||||||||||
• This function allows you to |
|
|
|
| ||||||||||
|
|
|
| Press the Cursor buttons (s or B) to select | ||||||||||
adjust picture resolution and |
|
|
| 2 | ||||||||||
|
|
|
| |||||||||||
quality in still mode. |
|
|
|
| CUSTOM, then press the ENTER button. | |||||||||
• An individual picture on TV screen is called as “frame”, |
| • The custom mode will appear. |
|
|
| |||||||||
which consists of two separate images called as “field”. |
| Press the Cursor buttons (s or B) to select | ||||||||||||
3 | ||||||||||||||
Some pictures may be blurred at the AUTO setting in |
| |||||||||||||
| AUDIO, then the ENTER button to confirm. | |||||||||||||
still mode due to their data characteristics. |
| |||||||||||||
4 | Press the Cursor buttons (K or L) button to select | |||||||||||||
• AUTO: Automatically selects the best resolution setting | ||||||||||||||
| ||||||||||||||
(FRAME or FIELD) based on the data characteristics of |
| an item, then press the ENTER button. | ||||||||||||
the pictures. |
|
|
|
| • This menu display contains 2 pages. Press the Cursor | |||||||||
• FIELD: Select FIELD when the pictures are still unsta- |
| button (L) repeatedly to show the next page. | ||||||||||||
ble even if AUTO is selected. FIELD stabilizes the pic- |
|
|
|
|
|
|
|
|
| |||||
tures, although the picture quality may become coarse |
|
|
|
|
|
|
|
|
| |||||
due to the limited amount of data. |
|
|
|
|
|
|
|
|
|
|
|
| ||
• FRAME: Select FRAME to display relatively motionless |
|
| AUDIO |
|
|
| AUDIO | |||||||
|
|
|
|
|
|
|
|
| ||||||
pictures in higher resolution. FRAME improves the pic- |
|
| DRC | ON | ANALOG AUDIO | 2 CHANNEL | ||||||||
|
| LPCM SELECT | OFF |
|
|
| ||||||||
ture quality, although it may unstabilize the pictures due |
|
| DOLBY DIGITAL | BITSTREAM |
|
|
| |||||||
|
| DTS | BITSTREAM |
|
|
| ||||||||
|
| BASS ENHANCER OFF |
|
|
| |||||||||
to simultaneous output of two field data. |
|
|
|
|
| AUDIO MODE | HDMI |
|
|
| ||||
|
|
|
|
| HDMI AUDIO | 2 CHANNEL |
|
|
| |||||
PROGRESSIVE
English
(Default: OFF) | QUICK |
|
| DISPLAY |
|
• Press the ENTER button repeat- |
| TV ASPECT | 4:3 LETTER BOX | ||
edly to turn ON or OFF. | STILL MODE | AUTO | |||
PROG.MODE | AUTO1 | ||||
|
|
|
| PROGRESSIVE | OFF |
• The setting will be effective | HDMI SELECT | RGB | |||
HDMI PICTURE | NORMAL | ||||
when you exit the setup screen |
|
| |||
by pressing SETUP. |
|
| |||
•When PROGRESSIVE is ON, P.SCAN appears on the DVD player’s display after you exit the setup screen.
•Refer to page 13 for more details.
•In the HDMI output mode, even when PROGRESSIVE is set to ON, signals are output always as Interlace.
PROG.MODE (Default: AUTO1)
• Press the Cursor buttons (K or |
|
| |
L) to select a mode for the pro- | DISPLAY | ||
gressive scan output, then press | |||
PROG.MODE | |||
the ENTER button. |
|
| |
AUTO1 |
| ||
AUTO2 |
| ||
• AUTO1: mode suitable for | VIDEO1 | ||
VIDEO3 | |||
| VIDEO2 | ||
images on the film |
|
| |
material. |
|
| |
•AUTO2: mode for images on the material of
•VIDEO1: mode for normal video material.
•VIDEO2: mode for video material with less movements.
•VIDEO3: mode for video material with many movements.
HDMI SELECT (Default: YCbCr)
• Select an HDMI output mode between YCbCr and RGB.
• When the connected equipment |
| DISPLAY |
|
| TV ASPECT | 4:3 LETTER BOX | |
is not compatible with YCbCr, | STILL MODE | AUTO | |
PROGRESSIVE | OFF | ||
HDMI signal is output as RGB | PROG.MODE | AUTO1 | |
HDMI PICTURE | NORMAL | ||
|
| HDMI SELECT | YCbCr |
regardless of the setting. |
|
| |
DRC (Dynamic Range Control)
(Default : ON)
• DRC function compresses the |
| AUDIO |
| |
|
|
| ||
range of sound volume. | DRC | ON | ||
DOLBY DIGITAL | BITSTREAM | |||
|
| LPCM SELECT | OFF | |
• DRC function is available only on | DTS | BITSTREAM | ||
AUDIO MODE | HDMI | |||
the discs that are recorded in the | BASS ENHANCER OFF | |||
HDMI AUDIO | 2 CHANNEL | |||
Dolby Digital format. |
|
| ||
LPCM SELECT (Default : OFF) |
|
| ||
• Set to ON when outputting in |
|
| ||
48kHz (or 44.1kHz). |
| AUDIO |
| |
| DRC | ON | ||
• This function is available only on | ||||
DOLBY DIGITAL | BITSTREAM | |||
|
| LPCM SELECT | OFF | |
digital outputting of a disc record- | DTS | BITSTREAM | ||
BASS ENHANCER OFF | ||||
ed in over 96kHz (or 88.2kHz). | AUDIO MODE | HDMI | ||
HDMI AUDIO | 2 CHANNEL | |||
•Sounds of the
exceed 96kHz (or 88.2kHz) will be output as 96kHz (or 88.2kHz) even if LPCM SELECT is set to OFF.
•This function is not effective for the HDMI sound output.
When playing disc with copyright protection
•The sound will be down sampled at 48kHz (44.1kHz), even if you set to OFF.
DOLBY DIGITAL
(Default: BITSTREAM) QUICK
• Set to BITSTREAM when the play- |
| AUDIO |
|
| DRC | ON | |
er is connected to a Dolby Digital | LPCM SELECT | OFF | |
DTS | BITSTREAM | ||
|
| DOLBY DIGITAL | BITSTREAM |
decoder. | BASS ENHANCER OFF | ||
AUDIO MODE | HDMI | ||
|
| HDMI AUDIO | 2 CHANNEL |
•This function is effective only for
the COAXIAL, OPTICAL and HDMI connections.
BITSTREAM:
DOLBY DIGITAL signals are output as Bitstream.
• For HDMI connection, if the connected equipment |
is not compatible with the Dolby Digital |
BITSTREAM, the signals are output as PCM |
HDMI PICTURE (Default: NORMAL)
•Select a HDMI picture mode between NORMAL and
ENHANCED.
•Select ENHANCED if the black- white contrast is not clear.
•This setting is effective only for HDMI RGB output.
5Press the SETUP button to exit and activate the new settings.
DISPLAY
TV ASPECT | 4:3 LETTER BOX |
STILL MODE | AUTO |
PROGRESSIVE | OFF |
PROG.MODE | AUTO1 |
HDMI SELECT | YCbCr |
HDMI PICTURE | NORMAL |
regardless of the setting. |
PCM: Convert Dolby Digital to PCM.
DTS
(Default : BITSTREAM) QUICK
• Set to BITSTREAM when the unit is connected to a DTS decoder.
BITSTREAM:
DTS signals are output as Bitstream.
•For HDMI connection, if the
connected equipment is not compatible with the
DTS Bitstream, the signals are output as PCM regardless of the setting.
PCM: Convert DTS to PCM.
– 31 – | EN |