3
Chapter 1. Quick Guide
1.2 Using the Hand Strap and Clip
■ Using the hand strap
As shown below, set the hand strap, and then put your hand through the hand strap
and hold the BHT-6000. This will prevent you from dropping the BHT-6000 acciden-
tally.
Hand strap
■ Using the clip
Attaching the clip
As illustrated below, first fit the left (or right) tab
of the clip into the matching groove of the BHT
body and then snap the other tab into place.
Tab
(There is one each on the
right and left ends.)
Groove in the BHT body
(There is one each on the right and left sides.)
Removing the clip
Insert the tip of a flat-head screwdriver between the
clip and BHT body as shown below, and then twist
the screwdriver to disengage the clip, taking care
not to scratch the BHT.
Small flat-head screwdriver
Using the clip
With the clip, you can clip the
BHT-6000 on your pocket.