65
Chapter 2. Getting Started the BHT-6000 and System Mode
If any error occurs, the BHT-6000 beeps three times
and shows the screen at left.
In parentheses are error codes which have the
following meanings:
(X X)
1: The received data is different from
the sent data.
2: A timeout has occurred during
standby for data reception.
1: 300 bps
2: 38400 bps
Press the C key to return to the TEST COM menu.
Testing the direct-connect interface port
Selecting the "2:CONNECTOR" on the TEST COM
menu displays the screen shown at left and then
starts testing the direct-connect interface port.
TEST COM
< CONNECTOR >
** Testing **
TEST COM
< CONNECTOR >
** Test NG **
(XX)
Upon normal completion of the test, the BHT-6000
beeps once and shows the screen at left.
Press the C key to return to the TEST COM menu.
TEST COM
< CONNECTOR >
** Test OK **