Desa PL35VPA, PD35VPA, PG35VPA, PV35VPA owner manual Unpacking, Assembly, Replace back panel

SAFETY INFORMATION	PRODUCT
Continued	IDENTIFICATION

CAUTION: The gas pressure regulator provided with this ap- pliance must be used. This regu- lator is set for an output pressure of 49.8" W.C. (1.8 P.S.I.).

24.Use correct pressure specifications, see page 6.

25.Propane/LP gas cylinder is not provided. Use a 20 lb. propane/LP gas cylinder marked propane. The cylinder supply system must be arranged for vapor withdrawal. The cylinder used must include a collar to protect the cylin- der valve. The cylinder must be provided with a shutoff valve terminating in a propane/LP gas supply cylinder valve outlet specified, as applicable, for connection no. 510 in the Standard for Compressed Gas Cylinders Valve Outlet and Inlet Connections, ANSI/CGA-V- 1, or connection no. 600 in the Compressed Gas Associationʼs Limited Standard Cylinder Valve Outlet Connection for Propane Small Valve Series or combination propane/LP gas cylinder valve and quick-disconnect assembly complying with 1.16.5-c and a safety relief device having a direct communication with the vapor space of the cylinder.

UNPACKING

1.Remove all packing items applied to heater for shipment.

2.Remove all items from carton.

3.Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

Control

Knob

Ignitor

Grill

Burner

(behind Grill)

Air

Openings

Figure 2 - Outdoor Patio Heater

ASSEMBLY

Tools required:

•#2 Phillips screwdriver

•9/16" Open end wrench

1.Remove back panel.

2.Attach hose.

3.Check for leaks. See Checking for Leaks, page 5.

4.Replace back panel.

Figure 3 - Attaching Hose

4 www.desatech.com 113530-01A