OWNER’S MANUAL

SERVICE

PROCEDURES

Continued

PUMP ROTOR

(Procedure if Rotor is Binding)

1.

Remove upper shell (see page 8).

2.

Remove filter end cover screws using

 

5/16" nut-driver.

3.

Remove filter end cover and air filters.

4.

Remove pump plate screws using 5/16"

 

nut-driver.

5.

Remove pump plate.

6.

Remove rotor, insert, and blades.

7.

Check for debris in pump. If debris is

 

found, blow out with compressed air.

8.

Install insert and rotor.

9.

Check gap on rotor. Adjust to

 

.003"/.004" if needed (see Figure 18).

 

Note: Rotate rotor one full turn to in-

 

sure the gap is .003"/.004" at tightest

 

position. Adjust if needed.

10.

Install blades, pump plate, air filters,

 

and filter end cover.

Nozzle Seal

Nozzle

Face

Nozzle

Burner

Fuel Line

Head

Air Line

Fitting

Fitting

 

Figure 16 - Removing Nozzle

Blade

Pump Plate

Air Intake Filter

Fan Guard

Filter End Cover

Insert

Rotor

11. Replace fan guard and upper shell.

12.

Adjust pump pressure (see page 9).

 

Note: If rotor is still binding, proceed

 

as follows.

13.

Perform steps 1 through 6 above.

14.

Place fine grade sandpaper (600 grit)

 

on flat surface. Sand rotor lightly in

 

“figure 8” motion four times (see Fig-

 

ure 19).

15.

Reinstall insert and rotor.

16.

Perform steps 10 through 12 above.

Air Output Filter

Figure 17 - Rotor Location

Gap Adjusting Screw

Blade

.003"/.004" Gap

Measured With

Feeler Gauge

Rotor

Gap Adjusting Screw

Figure 18 - Gap Adjusting Screw Locations

Sandpaper

Figure 19 - Sanding Rotor

106068

11

Page 11
Image 11
Desa REM200T owner manual Pump Rotor

REM200T specifications

The Desa REM200T is a sophisticated and versatile heating solution designed to provide efficient warmth for various spaces. This model stands out due to its blend of modern technology, user-friendly features, and reliable performance, making it an excellent choice for homeowners and businesses alike.

One of the main features of the Desa REM200T is its exceptional heat output, which can effectively warm rooms of various sizes. With an output capacity of up to 200,000 BTUs, this unit can easily handle larger spaces, ensuring consistent comfort during cold weather. The REM200T is fueled by natural gas or propane, providing users with flexible options depending on their energy preferences and availability.

This heating solution incorporates advanced technologies such as electronic ignition, which ensures reliable start-up and minimizes the need for manual ignitions. The inclusion of a high-efficiency design helps maximize heat output while reducing energy consumption, ultimately lowering utility bills and lessening environmental impact.

Safety is a paramount concern in any heating appliance, and the Desa REM200T does not disappoint in this regard. It comes equipped with multiple safety features including an automatic shut-off system that activates in the event of an overheating situation, as well as a durable construction designed to withstand wear and tear. The unit also features a built-in thermostat, allowing users to maintain their desired temperature effortlessly.

Another notable characteristic of the Desa REM200T is its aesthetically pleasing design. The unit boasts a sleek exterior that can seamlessly fit into various decor styles, making it a practical yet stylish addition to any space. Its compact dimensions ensure that it can be easily installed in a variety of locations, including homes, garages, and workshops.

Ease of use is further enhanced by the user-friendly control panel, which provides straightforward operation and programming options. Whether setting the timer or adjusting the heat output, navigating the controls is simple and intuitive.

In summary, the Desa REM200T offers a powerful and efficient heating solution with a range of features designed for safety, convenience, and performance. Its adaptability to different fuel types, impressive heat output, and modern technologies make it an ideal choice for those seeking reliable warmth in any environment.