Installation
Continued
Screen | Fireplace Front |
Rod | |
Bracket |
|
| Smoke Shelf |
Top Rail
Remove Screws then Replace to Secure Top Rail
Screen Rod
Push
On Nut
Ring
Screen
Figure 21 - Installing Fireplace Screen
Installing Glass Door and Rail
Bottom Rail 
(Use as a
Template before Drilling)
Drill Holes Concrete into Bricks Screws
Figure 22 - Securing Door Rails to
Fireplace
IMPORTANT: Install top and bottom rails and hardware before installing glass door panels.
IMPORTANT: This optional glass door kit can NOT be used with your fireplace if you have installed the optional Ash Lip Kit.
Rail installation
1.Remove screws securing top face to firebox (see Figure 22).
2.Align holes on rail to be installed at top and replace screws. Note: Door rails are identical until spring clips are in place.
3.Using remaining door rail as a template, place along front row of bricks at bottom making sure rail front surface is flush with fireplace bottom face surface. Mark hole centers and remove rail (see Figure 22).
4.Drill 9 - 5/32" diameter holes about 1" deep directly into bricks using a 5/32" concrete drill bit (not provided).
5.Place rail back on bricks and align holes. Secure using 9 concrete screws provided with glass door kit.
6.Secure retaining clips to top and bottom rails (see Figure 23).
Top Rail
Retaining 
Clip
Bottom Rail
Figure 23 - Mounting Door Retaining
Clips
www.desatech.com | 15 |