Mitel SX-2000 Lightware

6.PBX Setup Notes

6.1Mitel SX-2000 Lightware

This section provides information about the Dialogic® 4000 Media Gateway Series PBX administration requirements for Mitel SX-2000 Light systems. This information includes:

1.T1 Interface Administration

2.Configure the Mitel SX-2000 Light for the T1 Q.SIG protocol

3.Program Automatic Route Selection

4.Configure T1 protocol on NSU

Note: This document was developed using the Mitel SX-2000 Light system with the following software versions and MOSS Options:

1.SX-2000 Lightware Version 34.2.0.20

2.IMAT Version 7.5.1.4

3.MOSS Sheet Options:

Description

Option Number

Message Center

31

MSAN/APNSS

37

MSDN/DPNSS Data

38

MSDN/DPNSS Public Net Access

39

MSDN/DPNSS Voice I

41

MSDN/DPNSS Voice II

42

MSDN/DPNSS Voice III

43

MSDN/DPNSS Voice IV

44

MSDN/DPNSS Voice V

45

MSDN/DPNSS Voice VI

46

QSIG

57

T1/D4

64

Notes:

•Other software versions may not support certain features specified in this section.

•The terms “Select” and “Set” are used to imply the respective actions of using the arrow keys to highlight the specified choice and of typing in the specified value.

•The installation of the T1 board must be validated prior to this configuration. Sometimes this can only be done by the switch vendor depending on the administration access capability.

18