Mitel
TDM Stations | OCS Clients | |||||
|
|
|
| 210 | 211 | |
350 | 351 | |||||
| ||||||
|
|
|
|
|
| |
|
|
|
|
|
| |
IP LAN
T1/E1
PBX | DMG4000 | OCS Server |
3.Prerequisites
3.1PBX Prerequisites
The PBX must have all supplemental service packages installed for the Q.SIG protocol to operate properly and to provide all advanced supplemental services.
3.1.1 PBX Equipment Required
To support the T1 Q.SIG configuration as documented you need a Mitel T1 line card.
3.1.2 PBX Cabling Requirements
The cabling for Q.SIG connections must be CAT5e or better. A standard voice quality cable will not provide the desired signal quality and will cause the gateway to have issues establishing a connection on the
3.2Gateway Prerequisites
The gateway needs to support a T1 Q.SIG interface.
4.Summary of Limitations
No limitations noted as of the last update to this document.
4