Mitel SX-2000 Lightware

•Under Options, select Network-side Interface and Qsig.

•Click Update and then Close.

Step 3: Configure the PRI Link Characteristics as follows:

Select Config > System Configuration > PRI Link Characteristics.

Note: Parameters not listed below can be left at their default settings.

•Set PRI link number* to the link number in which the T1 Q.SIG is installed.

•Set Protocol Type to QSIG.

•Set Protocol Variant to ISO.

•Set Physical Type to T1/CSU.

•Select Network-side / Qsig master.

•Click the Characteristics button.

•Configure the T1/CSU Characteristics as follows:

46