•To connect the interface cable to the camera's DIGITAL terminal, lift the terminal cover with a fingernail under its upper edge and insert the connector until it clicks into place.
•Always grasp the connector’s sides to remove the interface cable from the camera's DIGITAL terminal.
3Set the mode switch to 
(Playback).
4Press the ON/OFF button until the power lamp lights green.
•Windows:
Proceed to step 5 below.
•Macintosh:
Refer to the Software Starter Guide and download images.
5Select [Canon CameraWindow] in the event dialog that appears on the computer and click [OK] (first time only).
If the event dialog fails to appear, click the [Start] menu, and select [Programs] or [All Programs], followed by [Canon Utilities], [Camera Window] and [Camera Window].
Computer a to Camera the Connecting
121