2004 Bay Collection
Owner’s Manual
Scrolling Message Center Messages
Because of the advanced programming features of your scrolling Digital Display Window, your hot tub will prompt you when you need to perform routine maintenance. For example:
Rinse Filters
Clean Filters
Change Water
Change Vision Cartridge
Every other month, the top line of your Digital Display Window will read,
“RINSE FILTERS” and the message “REMOVE FILTERS & RINSE WITH
HOSE... PUSH AND HOLD ICON BUTTON MORE THAN 3 SECONDS TO RESET THIS MESSAGE” will scroll from right to left on the bottom line of the display.
To reset this message, push and hold the Dimension One Spas ICON (logo)→ located at the right hand side of the control for 3 seconds.
On alternating months, the top line of your Digital Display Window will read, “DIRTY FILTER” and the message “REMOVE FILTERS & CLEAN IN
SOLUTION... PUSH AND HOLD ICON BUTTON MORE THAN 3 SECONDS TO RESET THIS MESSAGE” will scroll from right to left on the bottom line of the display.
To reset this message, push and hold the Dimension One Spas ICON (logo)→ Button located at the right hand side of the control for 3 seconds.
Every four months the top line of your Digital Display Window will read
“CHANGE WATER” and the message “TURN POWER OFF, DRAIN &
REFILL SPA...PUSH AND HOLD ICON BUTTON MORE THAN 3 SECONDS TO RESET THIS MESSAGE” will scroll from right to left on the bottom line of the display.
To reset this message, push and hold the Dimension One Spas ICON (logo)→ Button located at the right hand side of the control for 3 seconds.
When “CHANGE VISION CARTRIDGE” is displayed on the Digital Display Window, the system is telling you that it is time to replace it.
To reset this message, push and hold the Dimension One Spas ICON (logo)→ Button located at the right hand side of the control for 3 seconds.
If you purchased a Vision cartridge subsequent to the initial start up of your hot tub, please follow the programming instructions for VISION as outlined in the next Vision Cartridge section to set the
29
